Alarm.Com MyQ Manual de usuario descargar pdf (Pagina 37)

Total Connect 2.0 Online Help Guide

– 35 –



Configure the Detection Areas

By using smaller detection areas you get better motion detection

with less false triggers. Let’s take a look at some sample configu-

rations.



Adjust the Activity Threshold

The activity threshold can be adjusted for each detection

area. The default setting is mid position and that will work

well for most detections. However by taking the time to test

the scene and fine tune this setting, a higher success rate of

detections can be achieved.

REMEMBER - - A lower activity threshold value will cause the

camera to trigger more readily.

By following these guidelines, a high degree of valid motion

detections can be attained. However, because of the many

variables that can cause unwanted motion detection there is

no way to eliminate all undesired motion detection.

In the picture above, we avoid outdoor lighting and focus on three

capture areas; the stairway, far hallway, and near hallway.

This room has two walls of outdoor lighting that can cause prob-

lems. In this case, three detection areas were used. One area

covers possible intrusion from the windows, another covers the

stairs, and lastly one covers the hall with adjacent room.

This entryway is surrounded by side glass panes that are subject

to external lighting changes. Further, shadows caused by delivery

people and mail people may trigger motion. In this case we chose

one simple detection area that would trigger when the doors are

opened.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 49 50

Sin comentarios

Alarm.Com MyQ Manual de usuario Pagina 37